Compaq dx2810 - Microtower PC, Manual, Page: 11 / 12

Boot-time Diagnostic
Screen Disables/enables POST diagnostic messages display.
F9: Boot Menu Allows you to disable/enable Boot Menu.
F10: Setup Allows you to disable/enable BIOS Setup utility.
F11: Recovery Allows you to disable/enable HP Backup and Recovery.
F12: Boot from LAN Allows you to disable/enable PXE boot.
(Boot Device Priority)
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Allows you to specify which device groups will boot first, second, third, and fourth or to disable any
of the four:
●
Floppy Group
●
CD-ROM Group
● Hard Drive Group
●
Network Boot Group
NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system
has started.
Floppy Group Boot
Priority Specifies boot device priority within removable devices.
CD-ROM Group Boot
Priority Specifies boot device priority within CD/DVD drives.
Hard Drive Group Boot
Priority Specifies boot device priority within hard drives.
Network Group Boot
Priority Specifies boot device priority within bootable network devices.
Computer Setup—Exit
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 5 Computer Setup—Exit
Option Description
Exit Saving Changes Press Enter to exit saving changes.
Exit Discarding
Changes Press Enter to exit discarding changes.
Load Setup Defaults Press Enter to load setup defaults.
Discard Changes Press Enter to discard changes.
Save Changes Press Enter to save changes.
Table 4 Computer Setup—Boot (continued)
ENWW Computer Setup (F10) Utilities 5