Compaq Deskpro 1000 Series of Personal Computers
5-19
5.14
LED Retainer Assembly
1. Perform preparation procedures (Section 5.4).
2. Remove the system unit cover (Section 5.5).
3. Remove the front bezel assembly (Section 5.13).
4. From the outside of the chassis, press the tab
1
on either side of the LED assembly to pop it
out of the chassis, then continue to slide the assembly to the left.
Figure 5-15.
Removing the LED Retainer Assembly and Cables
To install the LED retainer assembly, reverse the previous procedure.
