background image

United States    

Compaq Presario Internet PC 7000 Series Computers

TROUBLESHOOTING

PRODUCT DESCRIPTION

TROUBLESHOOTING

ILLUSTRATED PARTS CATALOG

REMOVAL AND REPLACEMENT PROCEDURES

JUMPER AND SWITCH INFORMATION

SPECIFICATIONS

RESETTING USER

PASSWORDS

POWER-ON SELF

TEST (POST)

CONFIGURATION

DIAGNOSTIC

ERROR CODES

TROUBLESHOOTING

WITHOUT

DIAGNOSTICS

Configuration

 

This section explains how to use Setup and Compaq Utilities which should be accessed in

the following ways:

When a system configuration error is detected during the 

POST

.

1.  

To change factory default settings for some of the computer features.

2.  

To change the system configuration, which is sometimes necessary when you add or

remove optional hardware.

3.  

To set system configuration features.

4.  

Click a link below to go to the appropriate subsection:

Preparing the Computer

●   

Setup

●   

Accessing Compaq Utilities Options

●   

View System Information (INSPECT)

●   

 

Summary of Contents for 7RPK11 7000T























































































































































































































































































Reviews: