Compaq 7RPK11 7000T, Maintenance And Service Manual

Page: 243 / 278

Preparing the Computer
Ensure proper ventilation. The computer should have a 3-inch (7.6cm) clearance of
the system unit.
1.
Turn off the computer and peripheral devices.
2.
Disconnect any peripheral devices other than the monitor and keyboard. Do not
disconnect the monitor or keyboard if you want to test or use them to log error
messages.
3.
Install loop-back and terminating plugs for complete testing.
4.
Return to top
Setup
Modify settings for audio, storage, power management, communications, and input
devices.
1.
Get an overall picture of the computer's hardware configuration.
2.
Verify configuration parameters in determining problems.
3.
Set time and date.
4.
Running Setup
To access the Setup utility, turn on the computer and press the F10 key when the Compaq
logo appears on your screen.
NOTE
The actual menu displayed on your computer may vary slightly, depending on
your configuration.
Return to top