Compaq 7RPK11 7000T, Maintenance And Service Manual

Page: 274 / 278

United States
Compaq Presario Internet PC 7000 Series Computers
PRODUCT DESCRIPTION
PRODUCT DESCRIPTION
TROUBLESHOOTING ILLUSTRATED PARTS CATALOG
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
INFORMATION
SPECIFICATIONS
MODELS AND
FEATURES
CPU CONTROLS
AND LIGHTS
SIDE ACCESS
PANEL
INTERNET
KEYBOARD
CONTROLS
REAR CPU
CONNECTORS
POWER CORD
SET
REQUIREMENTS
Power Cord Set Requirements
Requirements:
The power cord set (flexible cord and wall plug) received with the computer meets the
requirements for use in the country where the computer was purchased.
Power cord sets for use in other countries must meet the requirements of the country where you
use the computer. For more information on power cord set requirements, contact your Compaq
authorized dealer, reseller, or service provider.
General Requirements:
The requirements listed below are applicable to all countries:
The length of the power cord set must be at least 6.00 feet (1.8 m) and a maximum of 9.75
feet (3.0 m).
1.
All power cord sets must be approved by an acceptable accredited agency responsible for
evaluation in the country where the power cord set will be used.
2.
The power cord set must have a minimum current capacity of 10A and a nominal voltage
rating of 125 or 250 Volts AC, as required by each country's power system.
3.
The appliance coupler must meet the mechanical configuration of an EN 60 320.IEC 320
Standard Sheet C13 connector, for mating with the appliance inlet on the Switch Box.
4.
Country-Specific Requirements:
Country Accredited Agency
United States UL*