Compaq 5525B/31/32, User Manual

Page: 54 / 140

Chapter 4
Unix PrintNet Configuration
54
At this point, you should be able to communicate with the PrintNet from
your local Unix station. This means the printer knows about an IP address
and subnet mask and has these settings in its current memory. However,
if the PrintNet is shut off, these settings will be lost unless you store them
in flash memory, as follows:
1. Load a Web browser on your Unix station and direct it to the URL
“
http:// PrintNetIPaddress/networkConf.html ” (e.g.
“ http://192.75.11.9/networkConf.html ”).
NOTE: If prompted for a “User ID” and password first, type in “ root ” for
the ID and press ENTER at the password prompt since there is
no default password.
2. At the “Network Configuration” HTML form that displays, click in the
field below the “IP Address” heading and type in the IP address for
the PrintNet.
3. Under the “Subnet Mask” heading, enter the PrintNet subnet mask.
NOTE: If you would like to communicate with the PrintNet from across
routers, you will need to fill in an entry within the “Routing”
section. Please see “Communicating Across Routers” on
page 57
for further details.
4. Click on the SUBMIT button when done and physically repower the
print server to make sure the new settings are in effect.