'HSOR\LQJWKH3UR/LDQW&OXVWHUIRU1HW:DUH
0096-0699-A
[HAServer]
Server=PL7000-2
This identifies the NetWare Servers in the NHAS Cluster.
Server=PL7000-1
This identifies the NetWare Servers in the NHAS Cluster.
NWLinkTimeout=30
This sets the NWLink timeout value before NHAS triggers the link
down. Keep in mind that this value is also used when the disk and
direct links fail.
FailoverDelay=30
This specifies the delay time of NHAS after the links are down to
failover the disk volumes to the surviving cluster node.
Broadcast=Off
.
Enabling this will broadcast a network message informing users the
status of the servers in the cluster when a failover or recovery
happens.
Rollback=Automatic
Setting this value to manual will disable automatic failback of the
volumes should the server that went down go back online.
DiskLink=258E5776
This is a unique number used for quorum arbitration by the disk link.
Note that if this value is accidentally changed or erased, we
recommend that you reinstall NHAS.
[Server.PL7000-2]
This subsection details the information for this particular server,
PL7000-2.
Volume=VOL2
Volume settings identify which volumes should remain exclusive to this
server.
Volume=SYS
Volume settings identify which volumes should remain exclusive to this
server.
PrimaryLicense=20614660
This License Number is used as the main Server License for this node
during normal operating conditions.
RecoveryCommand=REC1.NCF
By specifying a command or an executable script, when a server
enters the RECOVERY STATE, i.e. has failed, it processes the
commands listed here. This specified command should call a file that
contains all commands necessary for a successful IP failover.
FailoverCommand=FAIL1.NCF
By specifying a command or an executable script, when a server
enters the FAILOVER STATE, i.e. is taking over for the other failed
server, it processes the commands listed here. This specified
command should call a file that contains all commands necessary for a
successful IP failover.
CostandbyCommand=CO2.NCF
By specifying a command or an executable script, when a server
enters the COSTANDBY STATE, i.e. Normal condition, it processes
the commands inputted here. This specified command should call a
file that contains all commands necessary for a successful IP failover.
DiskLinkSector=0
This specifies the segment of the disk used for quorum arbitration by
the Disk Link.
SecondaryLicense=60022796
This License Number is used to append the other Server’s License
should a failover happen.
[Volume.PL7000-2.VOL2]
This subsection details the information for this particular server,
PL7000-2, in respect to Volume 2.
Shared=True
Setting the value to false will disable the ability for a drive to failover.
Mounted=True
Setting the value to false will disable NHAS from automatically
mounting this volume.
