English
1-13
Part Number: 303512-001 - Writer: Marianne Silvetti - Saved by: Alyce Klingler
Saved date: 09/21/98 2:11 PM
File Name: Nicklaus
Adjusting Picture Quality
Allow the monitor to warm up for 30 minutes before performing the
following procedures. The picture image stabilizes after a warm-up
period.
Optimizing Contrast
For best results, set your screen to a dark background (such as the DOS
prompt) before adjusting the following settings:
1. Set the brightness and contrast controls to their lowest levels.
2. Increase brightness until the background portions of the screen
are visible, then slowly reduce brightness until the background is
slightly extinguished.
3. Adjust contrast control to your preference.
Optimizing Focus
The default image size is preset at the factory. The front panel controls
can be used to increase the screen size beyond the default setting.
However, expanding the screen image beyond the default settings may
degrade the focus at the outer edge of the screen.
To enhance focus, use the lowest brightness level that gives satisfactory
results in your viewing environment.
✎
Settings that maximize contrast may not offer optimum focus,
and settings that maximize focus may not offer optimum contrast.
