Specifications
C-3
Compaq Confidential – Need to Know Required
Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch 16 Installation and Hardware Guide Comments:
Part Number: EK-BCP28-IA / 161356-001 File Name: K-APPC SPECIFICATIONS.DOC Last Saved On: 9/30/99 11:36 AM
Table C-3
Safety Specifications
continued
Country
Specification
EMC
France
A1+A2+A3+A4+
A11;73/23/EEC
EN55022 Level A;
89/336/EEC
Germany
A1+A2+A3+A4+
A11;73/23/EEC
EN55022 Level A;
89/336/EEC
Austria
A1+A2+A3+A4+
A11;73/23/EEC
EN55022 Level A;
89/336/EEC
Spain/Portugal/Italy
A1+A2+A3+A4+
A11;73/23/EEC
EN55022 Level A;
89/336/EEC
Sweden
A1+A2+A3+A4+
A11;73/23/EEC
EN55022 Level A;
89/336/EEC
Norway
A1+A2+A3+A4+
A11
Finland
A1+A2+A3+A4+
A11;73/23/EEC
EN55022 Level A;
89/336/EEC
Denmark
A1+A2+A3+A4+
A11;73/23/EEC
EN55022 Level A;
89/336/EEC
Australia
AS/NZS 3548:1995 Class A
New Zealand
AS/NZS 3548:1995 Class A
Optical Port Specifications
The Fibre Channel interfaces of a Compaq StorageWorks SAN Switch 16
system are equipped with optical port interfaces that use a shortwave
(780 to 850 nm) or long wavelength (1270 to 1350 nm) laser transmitter. The
laser complies with 21 CFR (J) Class 1 laser safety requirements. The
Fibre Channel interfaces use Non-Open Fibre Control Optical GBIC modules
in the switch circuit. Safe Class 1 operation is guaranteed by limiting optical
power emitted by the port, thereby eliminating the need for physical shutters.
The optical GBIC module uses the duplex-SC connector scheme.
