8
LIGHTING BURNER
Make sure the gas controls are set to the OFF position.
Step 1.
Turn gas valve on at the cylinder.
Step 2.
Take a lit match or gas lighter and position close
to the edge of the burner that is to be ignited, slowly turn
the gas control in an anti-clockwise approximately ¼ of
a turn.
If burner is not alight, return the control knob back to
the OFF position, allow the excess gas to disperse then
repeat ignition process.
ADJUSTING THE FLAME
Turn the air flow regulator in an anti-clockwise
direction to achieve a higher flame and in a clockwise
direction for a lower flame.
