5
CAST IRON RING BURNERS OWNERS MANUAL
CONNECTION
Your appliance is designed to connect directly on to a
POL gas cylinder using the specially designed LP Gas
hose and regulator supplied with the appliance.
Check that the gas controls are in the OFF position.
See figure 2.
Take the stove connector head of the hose and
attach to the gas inlet on the appliance, tighten
using a spanner. See figure 3.
Attach the other end of the hose to the gas cylinder
and tighten. See figure 4.
Turn the cylinder gas valve on in an anti-clockwise
direction for one full turn and then check the
connections for leaks with Companion Gas Leak
Detection Spray or soapy water. If a leak is detected
turn the cylinder gas valve OFF and re-tighten all
connections, then retest. See figure 5.
OFF
Figure 2
Figure 3
Figure 4
Figure 5
