8
Step 13
Mount the door handle with two
M4 x 25mm bolts and two heat
resistant washers. Insert each
bolt through the door from the
inside. From the outside place a
heat resistant washer over each
bolt. Then thread the bolts into the
handle. Tighten each bolt securely.
Step 14
Insert the temperature gauge with
bezel through the mounting hole in
the front of the door. Place a wing
nut onto the temperature gauge
stem from the inside of the door
panel and tighten it firmly.
Heat Resistant
Washers
COM3932_COMP490_smoker_cabinet_pack_manual_ED3.indd 8
13/04/12 2:57 PM
Summary of Contents for COMP490
Page 15: ......