background image

GENERAL WARNINGS

•   This appliance shall only be connected  

to cylinder with a 3/8” LH BSP gas cylinder  

valve certified to AS2469 standards. 

This appliance is designed for outdoor use only 

and must be operated away from any flammable 

material or surfaces and materials.

•   This appliance is to be stored in a dry and well 

ventilated location free from direct sunlight. 

Do not store when still connected to the cylinder. 

Make sure that the cylinder is disconnected and 

is stored in a well ventilated area, free from direct 

sunlight, heat and ignition sources. If being stored 

indoors ensure that the location complies with the 

standard AS/NZS1596.

•   This appliance must only be serviced by an 

authorised service agent, return to your place  
of purchase for service & repair.

DANGER!

•   During operation all surfaces and the glass  

will be extremely hot and should not be touched 

or handled.

•   Do not use the appliance if it has a leak, worn, 

deteriorated or damaged seals.

•   Handle with care even after brief use, always pick 

up using the legs or body, not the cylinder.

•   It may be hazardous to attempt to fit other types 

of gas containers or cartridges.

•   Use only in well ventilated areas.
•   Always operate appliance a minimum of 1000mm 

from flammable materials, walls & ceiling.

•   Do not use adaptors or modify appliance to fit 

other connectors or cylinders.

•   Children must we supervised by an adult at  

all times.

•   Never leave appliance unattended when operating. 
•   Do not modify for any other reason.

CARBON MONOXIDE HAZARD

•   This appliance produces carbon monoxide which 

has no odour. Using the appliance in enclosed 

spaces for example, caravan, car, boat or mobile 

home could cause 

DEATH

.

IMPORTANT

•   Keep way from children at all times.
•   Surfaces of the appliance will become hot during 

operation please take care when handling or 

moving the appliance.

•   Appliance is to be used on a stable, level, flat 

non flammable surface, the appliance should 

be protected from direct draughts and in a well 

ventilated place.

•   Take care that the primary air intakes, located 

on the burner tube of this appliance are not 

obstructed or that the air flow restricted by the 

placing of items or other appliances close to or 

adjacent to the inlets.

•   If you smell gas immediately turn the gas off at the 

cylinder and move the appliance and cylinder to a 

well ventilated area outside, keeping well away from 

sources of heat such as naked flames & pilot lights.

•   Do not attempt to move or relocate the appliance 

when it is operating, extinguish the burner &  

allow to cool, disengage the gas cylinder then 
move the appliance.

CHECKING FOR GAS LEAKS

•   Check that all connections are tight and that 

the gas cylinder connection has been tightened 

before you turn the cylinder gas valve on.

•   

NEVER

 check for leaks with a flame or pilot light.

•   Using soapy water coat all connections, if 

bubbles appear turn the cylinder gas control off 

and retighten the connection before re-testing.

•   Inspect the appliance regularly for signs of wear, 

leaks or incorrect operation. If symptoms such 

as flaring of the burner, issues with lighting, 

damages to hoses or connections or leaks from 

seals or gas controls are identified do not attempt 

to repair, return to your authorised stockist for 

service and maintenance.

•   To check if gas remains in the cylinder, disconnect 

from the appliance and hold the cylinder in a 

vertical position then shake from side to side, if 

there is a sound or feel of liquid movement inside 

the cylinder contains gas.

•   When changing gas cylinders ensure this is 

conducted outside in a well ventilated location 

free from people, animals & ignition sources 

such as naked flames, pilot lights & electrical 

equipment with heaters or elements.

COM1246_BBQ_manual_ED1.indd   2

14/07/10   3:46 PM

Summary of Contents for COMP282









Reviews: