background image

10

CARE INSTRUCTIONS

Using warm soapy water with a mild detergent wipe 

down all surfaces and areas of the appliance, taking 

care not to allow water to enter the burner outlets or 

aeration holes located in the burner tube.

Do not

 submerge the appliance in a sink or bowl.

Do not

 use abrasive cleaners or bleach.  

MAINTENANCE AND SERVICE

 During operation if it is noted that the burner flame is 

unstable, is changing colour from blue to yellow or has a 

distinct smell it is important that you take the appliance 

to your local authorised gas appliance repairer for 

inspection.

 Periodically check the gas control is tight and has no 

leaks, follow the testing for leaks procedure. 

 

For further information or assistance please contact 

customer service.

A selection of spare parts and components are available 

for your appliance to ensure years of operation. 

For more information in Australia call 1300 555 197  

or email: [email protected]

SPECIFICATIONS

Part no.

2162-65 / 2169-65

Model no.

LP Gas Lantern

Gas type

Propane

Gas jet size

0.12 mm +/- 0.01

Gas consumption

5.5 MJ/h - 100 g/h

Dimensions

Lid: Ø 

205 mm 

Body: Ø 

135 mm

Weight

0.60 kg

Certificate number

GSCS20059

Summary of Contents for 2162-65













Reviews: