1.CONNECTION
Your stove is designed to connect directly on to a 3/8” LH
BSP camping gas cylinder using the specially designed LP
Gas hose supplied with the appliance.
1. Check that the
gas controls
are in the “Off” position
(turned fully clockwise).
2. Take the stove connector
head of the hose and
attach to the gas inlet
on the appliance,
tighten up using fingers.
3. Attach the other end
of the hose to the gas
cylinder, tightening
using a spanner.
4. Turn the cylinder gas
valve on in an anti-
clockwise direction
for one full turn
and then check the
connections for leaks
with soapy water, if a
leak is detected turn
the cylinder gas valve
“Off” and retighten all
connections then retest.
OPERATING THE APPLIANCE
1. Gas control
2. Burners
3. Cylinder connection
4. Stove connection
5. Hose
6. Wind shield
2
2
5
6
6
3
1
1
4
