MALONE – MAL-BS52 5
For assembly advice or parts go to www.farmersfurniture.co.nz or call 0800 100 858
CAM INSTALLATION & OPERATION GUIDE
The Cam and Connecting Bolt system is used to put your unit together. Below is an explanation of how this
system works.
To see a demonstration click on the assembly assistance tab at www.warehousefurniture .co.nz
DRAWER SLIDES GUIDE
Your pack will contain 2 sets of Full Extension Drawer Slides. Each drawer requires one set. Left and right
sides are interchangeable. Each set consists of two pairs, each of which has two parts, the Cabinet
component and the Drawer component. You will need to separate the two parts before beginning the
assembly process. NOTE:
Slides could be greasy.
Each pair of slides in your pack will appear as below.
To separate the two parts of the slide, extend the slide as shown below.
Turn the extended slide onto its reverse side. Lift the black plastic tab as shown below, and slide the end
section of the slide right out, to separate the two pieces. NOTE:
This could be a bit stiff.
The two separated pieces will appear as below.
LIFT
Cabinet Component:
Drawer Component:
