Compac MAL-BS52 series, Instruction Manual

Page: 10 / 11

MALONE – MAL-BS52 10
For assembly advice or parts go to www.farmersfurniture.co.nz or call 0800 100 858
STEP 9 –
sides and bottom
 Lay the Drawer Front face down on a smooth, clean surface.
 Attach the LH and RH Drawer Sides by fitting them into place over the Connecting Bolts installed in
the Drawer Front.
 Turn the Small Cams clockwise to lock the Drawer Sides in place.
 Slide the Drawer Bottom into place in the grooves in the Drawer Sides and Drawer Front.
STEP 10 –
attach drawer back
 Fit the Drawer Back into place between the Drawer Sides. The groove in the Drawer Back will fit over
the end of the Drawer Bottom.
 Secure the Drawer Sides to the Drawer Back with four H9 Screws as shown below.
Drawer Front
RH Drw Side
Drawer
Back
Front
Drw Back
H9
Drw Front