ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 22/09/2014 | K01070
10
8.2. Grind adjustment system
8.2.1. Micrometrical system
Rotate the grind regulator ( ) until reaching the grind level desired.
Rotating the grind regulator clockwise will result in a courser grind; turning the
regulator counter clockwise will result in a finer grinder* (
Fig. 3
).
*
It is recommended that the motor be running when adjusting to finer grind setting.
This helps to avoid jamming the burrs, which can occur when coffee beans are in the
grind chamber, and the grind regulator is adjusted towards fine.
8.2.2. Stepped Grind adjustment
(optional)
In the stepped adjustment versions, the positions on the grind regulator are limited
by “steps” that are defined by the hole and pin points (
Fig. 4
).
The instructions detailed in section
8.2.1
. on adjusting the regulator should be
followed, while at the same time, pulling the brake post ( ) (
Fig. 4
) up to release the
locking action of the post.
