22
CLEANING AND MAINTENANCE
Humidity button
Plug the power, the machine is on the standby
mode. Turn on the button clockwise, then the ma-
chine is on the running mode, the spray is running
out. When the indoor air is dry, choose the high level.
Switch/spray control
Color light button: The red button at the back is
the nightlight control switch, please turn off the
nightlight when you do not need it.
ATTENTION:
Please unplug the power before cleaning and
maintaining, to ensure the machine is off.
ATTENTION:
When the water tank lacks water, the red light
is sparkling, to remind users to add water, while the machine
has stopped working. It will restart working after the refill.
Transducer
Pour a small amount of descaling powder on the surface of the
transducer, then pour in a certain amount of water for 5 minutes,
wash with a brush and rinse with water.
Water tank
Remove the water tank from the body, rotate
the cover, wash directly with water, and wipe
the surface with a soft cloth. It is recommended
to be cleaned once every two to three weeks.
If there is scale in the sink, use a soft cloth
to wipe the water and rinse with water. Be
careful to clean the scale around the floater.
Water sink
Attention: When pouring the water in the sink,
it should be in accordance with the arrow,
otherwise the water will flow into the inside
and damage the internal component. It is
recommended to be cleaned every week