14
OPERATION
A “flashing zero” appears on the display when the battery charge level is getting too low. The
pad motor automatically turns off. Batteries must be recharged as soon as possible.
A residual charge remains so as to move the machine to the recharging point.
TRACTION
This machine has an electronically controlled traction with three forward and three reverse
speeds. To move the machine first turn the key and then move the switch forward (to move
forward) or backward (to move in reverse). Press the accelerator pedal and the machine will
start to move. Rotate selector to adjust forward movement speed.
An audio signal will sound when the machine is moving in reverse.
BRAKES
The machine has an electronic braking system. To brake, in normal conditions, just release
the accelerator pedal. Actuate the pedal-operated mechanical brake whenever the service
brake operates poorly or whenever necessary (parking, danger, etc.). Actuate by pushing the
pedal down and pulling it towards yourself until lever (1) hooks up (the red brake signal lamp
turns on when the lever is hooked up).
POLISHING PAD MOTOR
WARNING!
The pad motor starts only when the machine is moving forward in
order to prevent damage to the floors
The pad motor is electronically controlled. The red signal lamp on the dashboard starts to
flash when preset overload limits are reached. After a few seconds the motor will stop and
the pad switch signal lamp will turn off. To start the motor up again you must turn the main
switch key off and on. If the motor stops again you must find the cause of the overload to
prevent damage to the motor.
1
