Comnet LBI-38435B, Maintenance Manual

Page: 9 / 21

LBI-38435B
9
MONITOR A momentary type switch to allow you
to monitor the selected channel before
transmitting a message. It disables
Channel Guard and squelch and will
allow you to hear noise if the channel is
not busy. This may be convenient when
setting the volume to the desired
listening level.
CHANNEL Two momentary type switches. Press
CHAN 1 (up arrow) to select channel 1;
press CHAN 2 (down arrow) to select
channel 2. The selected channel
number will be illuminated on the
control module.
With an eight or sixteen channel radio,
two momentary type switches select
channels electronically. Press and hold
the ADD switch to increase the channel
number; press and hold the DELETE
switch to decrease the channel number.
The selected channel is displayed by a
7-segment display.
ADD When used in conjunction with the
SCAN switch, adds channels to the scan
list.
DELETE When used in conjunction with the
SCAN switch, deletes channels from
the scan list.
SCAN A momentary type switch to turn the
scan function on or off. When used in
conjunction with the CHANNEL
switch, it enables the ADD/DELETE
function to allow the scan list to be
modified. When turned on, the scan
indicator is illuminated.
INDICATORS
XMIT
(Transmit)
Lights when your message is being
transmitted.
BUSY
Lights when the channel is in use.
CHANNEL
1 2
Lights to indicate which channel has
been selected.
P1
When lit, indicates that the channel
displayed is a Priority 1 scan
channel.
P2 When lit, indicates that the channel
displayed is a Priority 2 scan
channel.
S When lit, indicates that the channel
displayed is a non-priority scan
channel.
SCAN
When lit, indicates that the radio is
operating in the scan mode.
The channel indicator displays the
following conditions:
Figure 2 – Two Channel Radio