QSG_CWFE2SC(M,S)2 Rev. 11.17.17 PAGE 3
QUICK START GUIDE
CWFE2SC(M,S)2
TECH SUPPORT: 1.888.678.9427
DIP-switch
The DIP-switch is used to configure operation mode for LLF (Link Lost Forwarding) and operation
mode for UTP/Fiber port. The default value of DIP switch is OFF.
SW No
Status
Description
1
ON
UTP 100 Mbps Full Duplex Mode
OFF
UTP Auto-Negotiate
2
ON
Fiber in Half Duplex
OFF
Fiber in Full Duplex
3
ON
LLF Enable
OFF
LLF Disable
4
ON
Pure Converter mode
OFF
Switch Converter mode
Rear Panel
The rear panel contains a power socket, which accepts 5-12 VDC @ 2.7 W.
Connect the included Power Supply to the rear panel DC IN jack.
Plug the AC input of the Power Supply to a commercial power source.
DC IN
Fast Fiber Converter Module - Rear Panel
Connections
CAT5e
CAT5e
2 Multimode
or Single Mode
Optical Fibers
Ethernet
Device
CWFE2SC
CWFE2SC
Ethernet
Device
POWER
SUPPLY
POWER
SUPPLY
