inS_cngE5mS_rEv–
02/19/13 PagE 74
INSTALLATION AND OPERATION MANUAL
CNGE5MS
Tech SupporT: 1.888.678.9427
Port Monitoring
Port monitoring supports TX (egress) only, RX (ingress) only, and TX/RX monitoring. TX monitoring
sends any data that egress out checked TX source ports to a selected TX destination port as
well. RX monitoring sends any data that ingress in checked RX source ports out to a selected RX
destination port as well as sending the frame where it normally would have gone. Note that keep
all source ports unchecked in order to disable port monitoring.
Port monitoring interface
The following table describes the labels in this screen.
Label
Description
Destination Port The port will receive a copied frame from source port for monitoring
purpose.
Source Port
The port will be monitored. Mark the blank of TX or RX to be
monitored.
TX
The frames come into switch port.
RX
The frames receive by switch port.
Apply
Select
Apply
to set the configurations.
Clear
Clear all marked blank. (disable the function)
Help
Show help file.
