Comnet CNGE5MS Installation And Operation Manual Download Page 69

Page: 69 / 100

inS_cngE5mS_rEv–

02/19/13 PagE 69

INSTALLATION AND OPERATION MANUAL

CNGE5MS

Tech SupporT: 1.888.678.9427

System Warning

System alarm support two warning mode: 1. SYSLOG. 2. E-MAIL. You can monitor switch through
selected system events.

System Warning – SYSLOG Setting

The SYSLOG is a protocol to transmit event notification messages across networks. Please refer to
RFC 3164 - The BSD SYSLOG Protocol

System Warning – SYSLOG Setting interface

The following table describes the labels in this screen.

Label

Description

SYSLOG Mode

•  Disable: disable SYSLOG.
•  Client Only: log to local system.
•  Server Only: log to a remote SYSLOG server.
•  Both: log to both of local and remote server.

SYSLOG Server
IP Address

The remote SYSLOG Server IP address.

Apply

Select

Apply

to set the configurations.

Help

Show help file.

Summary of Contents for CNGE5MS





































































































Search results

Summary of Contents for CNGE5MS

Reviews:

Related manuals for CNGE5MS

Brands by name

Popular brands

Comnet CNGE5MS, Installation And Operation Manual

Search results

Summary of Contents for CNGE5MS

Reviews:

Related manuals for CNGE5MS

Brands by name

Popular brands