Comnet CNGE20FX4TX16MS Installation And Operation Manual Download Page 102

Page: 102 / 155

INS_CNGE20FX4TX16MS

04/30/18 PAGE 102

INSTALLATION AND OPERATION MANUAL

CNGE20FX4TX16MS

TECH SUPPORT: 1.888.678.9427

Table 4-71. QoS > General > DSCP Mapping

Item

Description

DSCP to Queue Mapping

DSCP

Enter the DSCP entry to define the precedence values.

Queue

Click the drop-down menu to select the queue designation for the DSCP value.

Queue to DSCP Mapping

Queue

Displays the queue value for the DSCP map.

DSCP

Enter the DSCP entry to define the precedence values.

Apply

Click Apply to save the values and update the screen.

The ensuing table for DSCP Mapping Information settings are informational only: DSCP and
Mapping to Queue.

The ensuing table for Queue Mapping Information settings are informational only: Queue and
Mapping to DSCP.

IP Precedence Mapping

The IP Precedence Mapping allows you to set IP Precedence mapping. To access this page, click
QoS > General > IP Precedence Mapping.

Figure 4-74. QoS > General > IP Precedence Mapping

Summary of Contents for CNGE20FX4TX16MS




























































































































































Search results

Summary of Contents for CNGE20FX4TX16MS

Reviews:

Related manuals for CNGE20FX4TX16MS

Brands by name

Popular brands

Comnet CNGE20FX4TX16MS, Installation And Operation Manual

Search results

Summary of Contents for CNGE20FX4TX16MS

Reviews:

Related manuals for CNGE20FX4TX16MS

Brands by name

Popular brands