INS_CNFE2DOE2_REV–
10/11/11 PAGE 5
INSTALLATION AND OPERATION MANUAL
CNFE2DOE2
TECH SUPPORT: 1.888.678.9427
Assign IP Address to a Terminal Server
A unique IP address has to be assigned to each terminal server device. You can connect one
at a time to change the default IP address. The default IP address of the device is the same:
192.168.12.1.
Connect the terminal server on to your local Ethernet network which your PC is connected to, as
Figure 1 below, and power on the unit.
Figure 1
Following the steps below to set up your PC IP address to the same subnet as the terminal servers.
Disable the machine’s wireless network connection and any other internet connections that could
interfere with the network being created.
Select the Internet Protocol (TCP/IP) connection within the Local Area Connection Properties from
start -> Control Panel -> Network Connections ->
Properties
.
