INSTALLATION AND OPERATION MANUAL
CLFE(X)IPS
INS_CLFE(X)IPS_REV–
12/15/11
PAGE 3
Tech SupporT: 1.888.678.9427
FIGURE 3 – POWER LED INDICATORS
FIGURE 4 – ETHERNET LED INDICATORS
POWER
RED
Power is on
OFF
Power is off
TRAFFIC (Standard)
Link
GREEN
Flashing – Connection is
oK with traffic
–
YELLOW
–
Connection is oK
OFF
No connection
No connection
FIGURE 5 – POSSIBLE ETHERNET CONFIGURATION
Multiple Configurations are possible. Consult ComNet Design Center.
≤3,000ft (914m) Cat-5
≤5,000ft (1524m) Coax
CopperLine Managed High Power Midspan
NVR
CLFE16IPS
Switch
CNGE2FE24MS
data + Power
data +Power
CLFE1UTP
CLFE1UTP
CLFE1UTP
CLFE1UTP
PoE Camera
PoE Camera
INSTALLATION
Connect the unit to the included AC Power Adapter and plug into grounded power outlet.
Insert the network cable from the head end devices into Ethernet ports marked “Input”
Insert Network cable from PoE device into Ethernet ports marked “output.” the data from Input 1 will be
delivered through the corresponding output 1, and so on.
Confirm PoE device operation
Port 1
Hi Power POE Midspan
CLFE8IPS
Made in U.S.A
Port 2
Port 3
Port 4
Output
Input
Communication Networks
Port 5
Port 6
Port 7
Port 8
Power
RS-232
USB
Setup
Port 1
Hi Power POE Midspan
CLFE8IPS
Made in U.S.A
Port 2
Port 3
Port 4
Output
Input
Communication Networks
Port 5
Port 6
Port 7
Port 8
Power
RS-232
USB
Setup
Port 1
Hi Power POE Midspan
CLFE8IPS
Made in U.S.A
Port 2
Port 3
Port 4
Output
Input
Communication Networks
Port 5
Port 6
Port 7
Port 8
Power
RS-232
USB
Setup
