Page 5
R.5-MAX, R2-MAX, R6-MAX
Installation and Operation Manual
TYPICAL R6-51MAX AND R6-BHMAX
R6 models all have the same exterior dimensions and
enclosure.
Safety Cable Attachment Point:
(Utilize empty rigging
point. User must supply appropriate fastener and safety
cable).
PRODUCT FEATURES IDENTIFICATION
Supplemental Mounting Points
(5/16" on outside flange intended
for extra support/stabilization).
CAUTION: NOT FOR USE AS
PRIMARY SUPPORT OR FOR
SAFETY CABLE ATTACHMENT
Input Cable(s) 12' (3.65m) SJOW
- each secured with a gland nut
R6-BHMAX: 1 cable
R6-51MAX: 3 cables (LF, MF, HF)
Multiple inputs are labeled
Mounting Rigging Points
(1/2"-13 captive stainless
steel bolts fitted with lock,
flat and rubber washers)
MF/HF Horn Mounts: (3 3/8"-16 stainless
steel hex bolts on both ends.
NOT FOR SUSPENSION, MOUNTING, OR
SAFETY CABLE ATTACHMENT
Weather-Stop™ Grille
(attached by 28 #6 Stainless
steel sheet metal screws)
Mounting Rigging Points
(1/2"-13 captive stainless
steel bolts fitted with lock,
flat and rubber washers)
Four 1/4”-20 stainless steel bolts
on each side used as structural
support between shell and flare
CAUTION: NOT FOR USE AS
PRIMARY SUPPORT OR FOR
SAFETY CABLE ATTACHMENT
Supplemental Mounting Points
(5/16" on outside flange intended
for extra support/stabilization).
CAUTION: NOT FOR USE AS
PRIMARY SUPPORT OR FOR
SAFETY CABLE ATTACHMENT
Note:
Cabinets are handmade and measurements may
vary slightly due to the thickness of the fiberglass.
