© 2010 by Community Products, LLC
BF32 DC 6783 Revision D
CUSTOMER SERVICE:
United States
PO Box 2
Ulster Park, NY 12487
Office hours: 9-5 EST
Phone (800) 777-4244
Fax (800) 336-5948
(845) 572-3468
www.CommunityPlaythings.com
Page 2
User and
Maintenance
Information
(cont’d)
H505
Mini Art Island Top/
Floor Easel
H500
Mini Art Island
Do not immerse whiteboards in water.
Abrasive cleaning agents will damage the
whiteboard surface.
Steel magnets may scratch the whiteboard.
Construction
The easel frame and storage unit are constructed of
solid hardwood with a clear nontoxic finish.
The adjustable shelf is made of durable hardwood
plywood.
The whiteboards are steel with a foam core.
The trays and other plastic parts are injection-
molded.
Packaging Recycling
All our packaging is recyclable in two simple
categories:
Please help us preserve the earth for the children and
recycle at an appropriate facility.
User Modifications
We are not responsible for modifications made by
customers to our products in the field without our
supervision, testing, or evaluation.
Ordering Parts
To order replacement parts, contact Customer
Service with a description of the part(s) needed and
the ID Code from the product.
Use only replacement parts supplied by
Community Playthings.
Mobility
It is important to understand how to operate the
mobility feature, which can be easily engaged, and
disengaged using the following procedure:
1. With one person at each end of the unit, tip
slightly forward or back allowing the toe trim
to pivot.
2. One person keeps the item tipped while the
other rotates the toe trim to the desired posi-
tion by pulling or pushing on one of the hand-
holds at each end of the toe trim. (Fig. C)
3. Tip the unit slightly to the other side and repeat
the procedure with the other toe trim.
Always use the handholds provided at each end of
the toe trim. (Fig. C)
Adjustable Shelving
The plywood adjustable shelf
fits into grooves on the sides. It is removed by lifting
it up and sliding it out.
Accessories
Magnets for holding paper and Tote pans, 3" and 6"
deep, are available from Customer Service.
We do not provide whiteboard markers, magnetic
shapes, paint and paper, etc.
Maintenance
The wooden parts of this product are not fully water-
proof and therefore should not be left outdoors.
Periodically inspect for cracks, breaks, loose parts,
missing parts, and/or malfunctions. The housing of
the magnets may crack if they are dropped repeat-
edly. Remove the product or parts from service
when any condition develops that might make
operation unsafe.
Cleaning
The whiteboard can be cleaned using a soft
dry cloth.
If the ink has been left on for a long time, rub
clean with a dry cloth and then use a cleaner
recommended by the supplier of your whiteboard
markers or a non-abrasive general purpose cleaner.
Stubborn stains may need some extra effort to
remove completely. Wipe off residual paint with
warm water. Too much water may harm the finish of
the wooden parts.
Figure C
Packaging Materials
Recycling Category
Cardboard boxes and
pads, newsprint
corrugated cardboard
Plastic wrap, sheet foam,
foam pads
Plastic #4 LDPE
