Page 10
Fiberlink® 7500 Series User’s Manual
Fiberlink® 7500 Series
Lock Bandwidth & Input Equalization
Lock Bandwidth and Input Equalization
The 7500/7510/7514 and 7502/7512/7516 transmitter units have a Lock Bandwidth (BW)
and Input Equalizer (EQ) Setting Dip switches located on the front panel. The default
equalizer (EQ) setting is for a short DVI cable, less than 10 feet. The default Bandwidth (BW)
setting is NARROW BW. This should work for most clean, “noise-free” DVI sources. A narrow
bandwidth setting should be used for dirty or noisy DVI sources.
Factory Default:
Switches 1, 3 and 4 in the up position; switch 2 in the down position.
Lock Bandwidth:
Switches 1 and 2 control the Lock Bandwidth:
Input Equalization:
Switches 3 and 4 control the Input Equalization:
Wide
Medium
Narrow
Very Narrow
Short
Medium
Long
Very Long
BW EQ
1 2 3 4
BW EQ
1 2 3 4
BW EQ
1 2 3 4
BW EQ
1 2 3 4
BW EQ
1 2 3 4
BW EQ
1 2 3 4
BW EQ
1 2 3 4
BW EQ
1 2 3 4
BW EQ
1 2 3 4
