- 15 -
Setting the radio to bridge through the ICRI
Set the volume control on each connected radios to mid position between fully CLOCKWISE and
COUNTER-CLOCKWISE.
Set each radio to the desired channel. (They IAN not be on the same channel/frequency)
Because the ICRI is connected to the radio via the speaker jack, the audio path on the attached radio
is disrupted. You will be unable to hear or speak through that radio. If you can hear or talk through
the radio, the cable may not be properly attached to your radio.
The LED directly beside the interface jack will light as audio is transmitted from the radio through
the ICRI.
Troubleshooting radio setup
NOTE: See Interoperability DO’s and DONT’S in Appendix E.
1. Verify the radio can function normally with a speaker-mic attached.
2. Verify the radio has a charged battery.
3. Verify to the interconnect cable is firmly connected to the radio and the ICRI.
The ICRI use locking ring to secure the connector, use the radio connector locking mechanism if
provided