manualshive.com logo in svg

Communication-Applied Technologies ICRI-2P, Manual, Page: 11 / 34

Share
Download
Communication-Applied Technologies ICRI-2P Manual Download Page 11

- 11 - 

Power the ICRI-2P with cigarette lighter or alligator clips cable (P/N 179.0730) 

 

NOTE: The cable assembly consists of three subassemblies:  (a) the universal interconnect cable, 
(b) the cigarette lighter plug with locking in-line jack and (c) the alligator clips with locking in-
line jack.  

 

After selecting the DC source, connect the in-line jack to the in-line plug.  Note that the pins are 
polarized and the connection is made so that the jack’s locking “blades” slide between the “blades” 
on the plug and the body of the plug. 

Connect the assembled cable to the DC source. 

Connect the other end of the assembled cable to the ICRI’s rear panel jack labeled DC INPUT. 

Note:  Care should be taken to align the arrow on the plug with the  arrow on the  jack before 
attempting to insert the plug. 

To remove the plug, hold the fluted part of the plug’s barrel and pull straight out. 

To separate the in-line socket, gently lift one of the blades from the plug so that the locking 
mechanism is released.  Then pull the plug and socket apart. 

 

 

FIGURE 10: DC POWER SUPPLY SUB-ASSEMBLIES 

 
 

 

FIGURE 11: IN-LINE PLUG ASSEMBLY 

Summary of Contents for ICRI-2P



































Reviews:

No comments