www.commscope.com
User Guide 860633028
June 2018
Page 24 of 30
© 2018 CommScope, Inc. All Rights Reserved
Rebooting the Unit and Resetting to Factory Defaults
Clear Memory
The
Clear Memory
tool can be used to erase all information in the imVision Controller X and reset all configuration, network
and security settings to factory defaults. The installed firmware version is not affected by this operation.
To clear memory and reset the imVision Controller X to factory default settings, use the imVision Controller X’s display to
navigate to the
Clear Memory
item on the Tools menu.
In the
Clear Memory
window, enter the last three digits of the serial number into the box and press Continue.
After pressing Continue, the imVision Controller X will restart to enact the changes.
RESET Button
A RESET button is accessible through a pin-hole in the back of the imVision Controller X base. The RESET button can be used
to reboot the imVision Controller X and to reset the imVision Controller X to factory defaults.
Use a dull, pointed object (for example, a straightened paper clip) to push the RESET button through the pin hole indicated
by “RESET”.
No cables are shown, detail provided to show port layout
