860584440
Instruction Sheet
www.commscope.com
Page 6 of 11
2. Attach cable bar to rear of panel. For 48-port panels, two cable bars are provided.
3. Lay cables evenly in cable troughs and secure using hook-and-loop straps as shown.
Step 5
– Install Front Labels and Label Covers
1. Print the port designations on the white label cards provided. Slide labels and label covers into the label
holders from either end. Each label holder will accommodate labels up to .265 inches (6.7mm) high x 3.50
inches (89mm) wide.
2. Blank, voice, and data icons can be ordered separately in a wide variety of colors and placed into the
pockets in the lower portion of the label holders.
Note:
Product code M61K-XX (blank, voice, and data icons) to be ordered separately. XX denotes the color
abbreviation.
