PoE Extender Hardware Manual
16
This product is copyright © 2019 CommScope, LLC. All Rights Reserved.
Ethernet Cables Installation
Cat5e or better shielded patch cords are recommended for the PoE connection(s). It is generally
easiest to install the cables in order from left to right, starting with the leftmost PoE or DC power
connection and ending with the hybrid cable:
1.
Thread the seal cap and grommet on to the cable as shown below.
Note:
If using a pre-terminated Ethernet cable, it may be necessary to remove the boot. In
some cases, it may also be necessary to cut the cable and re-terminate a new plug after
threading the cable through the grommet.
2.
Before tightening the seal cap, insert the RJ45 plug into the jack with the lock tab facing
up.
