CommScope OMX 600 Splice Bay, User Manual

Page: 8 / 50

ADCP-93-090 • Rev C • March 2021
Page 2
© 2021, CommScope, Inc.
1.2 OMX Splice Bay without Locking Splice Tray Doors (Standard)
The OMX600 Splice Bay provides a splicing location for OSP (outside plant) and IFC
(intrafacility cable) cables and can accommodate up to 120 round splice trays (1440 splices). The
standard version’s cable clamp positions also can be custom configured. For IFC counts in
multiples of 72 (as shipped), use the 72-fiber IFC configuration (
Figure 2 or Figure 3 , depending
on cable origin, left view); for IFC counts in multiples 96, use the 96-fiber IFC configuration
(Figure 2 and 3, depending on cable origin, right view). For IFC counts in multiples of 96,
reposition cable brackets as shown in Figures 2 and 3, depending on cable origin.
1.2.1 72- to 96-Fiber IFC Frame Re-Configuration, Raised Floor Cable Environment
Figure 2. 72- to 96-Fiber IFC Frame Re-Configuration, Raised Floor Cable Environment
(Shown without Front Doors) (Front View)
26055-A
72-FIBER IFC
CABLE CONFIGURATION
96-FIBER IFC
CABLE CONFIGURATION
REPOSITIONED CABLE
TIE-DOWN BRACKETS
MOVE UP
ONE POSITION
MOVE DOWN
ONE POSITION
REMOVE
NO CHANGE
CABLE BRACKET
NO
NO
NO
LEGEND