Chapter 4: Tab and link elements defined
Radio
Channel BandwidthRSSI
Network Name (SSID)/MAC
MAC
5 GHz
48
40 MHz -59 dBm telenet-AEC6E
5C:35:3B:4A:EC:74
5 GHz
48
40 MHz -56 dBm telenet-AEE5F
5C:35:3B:4A:EE:65
WPS (Wi-Fi Protected Setup)
WPS is a simple way to add and securely configure new clients on the WLAN.
Wi-Fi Protected Setup (WPS) is not a security protocol. By default, Privacy is set to Wi-Fi
Protected Access (WPA-PSK) with a 12-character security key. WPS allows you to securely
share the exact security configuration with a new client that you are adding to the WLAN,
without needing to look up and type this security key.
Clients can be added by implementing any of the WPS setups on this page. Not all wireless
devices support WPS. Refer to their documentation.
■
Radio Selection:
Provides selection for either the 2.4 Ghz or the 5.0 Ghz frequencies.
Note:
The Gateway allows only one radio to have WPS enabled at a time. The
device defaults to ON for the 5 GHz radio.
■
Wi-Fi Protected Setup:
May be either
Enable
or
Disable
. To activate WPS features below, select
Enable
and
click
Apply
.
■
Generate PIN:
Click
Generate PIN
; a unique 8 digit PIN is generated.
■
WPS PIN:
To add a new client:
■
Choose the desired radio (2.4 GHz or 5 GHz) from the Radio Selection pull-down.
NVG558 4G-LTE Gateway User Manual STANDARD Revision x.1
53
