CommScope NVG558 User Manual Download

Page: 41 / 92

Chapter 4: Tab and link elements defined

Note:

You must have an account with one of the dynamic DNS service providers

(DynDNS, ZoneEdit, etc.) listed in the Service drop-down list box.

■

Domain Name:

The name of your domain, such as

example.com

■

Dynamic DNS:

Select

Enable

to enable Dynamic DNS.

■

Service:

Select your Dynamic DNS provider from the drop-down menu.

■

Username:

Your Dynamic DNS provider account.

■

Password:

The password associated with the entered user name.

■

Hostname:

The name of your host. This may be the same as your domain name, or

include a prefix such as

www.example.com

Routing

The Routing page provides the capability to configure Routing Information Protocol (RIP)

send and receive on LAN and WAN sites in the upper panel. The lower panel allows you to

configure custom routes.
Select

Routing

from the Broadband tab to view the Routing page.

NVG558 4G-LTE Gateway User Manual STANDARD Revision x.1

Summary of Contents for NVG558





























































































Search results

Summary of Contents for NVG558

Reviews:

Related manuals for NVG558

Brands by name

Popular brands

CommScope NVG558, User Manual

Search results

Summary of Contents for NVG558

Reviews:

Related manuals for NVG558

Brands by name

Popular brands