6
5.2.5 Bring shaved/stripped tube to the front side.
i
Be careful with the pre-installed pigtails.
5.2.8 Place shaved/stripped tubes in the outer tube holder channel
of the base tray. Insert orange rubber tube.
i
Align the orange rubber tube with the rib indicated by the arrow.
5.2.7 Secure the strength members.
5.2.6 Bring strength member to the CTU at the
back side.
i
Wrong installation: make sure tube is not twisted around the
strength member.
i
Wrong installation: don’t bring strength member to the front side.
5.2.9 Close the latches of the multiple hinge clamp.
Front side
Back side
5.2.10 Secure the hose clamps on the inside again.
i
Be careful with the pre-installed pigtails.
