Revisions to this instruction sheet include:
Updated document to corporate requirements
Added Stop! banner to page 1
Removed connector kit part numbers and
duplex clip part number
Added multimode cable and changed
description for use of tubing
Modified Figures 1, 2 (Details A and B), 3, 4, 5,
and 6
Added Detail C to Figure 2
Changed ferrule dust cap to termination cover
Changed combination strip tool, cleave tool, die
set, hand tool frame assembly, microscope,
microscope adapter, and LC termination kit;
added cable holder assembly; and removed
combination termination kit
Modified Step 2 of Paragraph 5.1, A and
Steps 2 and 6 of 5.2, A
Removed CAUTION from Paragraphs 5.1, B
and 5.2, B
Changed 1 click to 3 clicks in Step 3 of
Paragraph 5.1, C and 5.2, C
Changed “receptacle” to “holder” in Step 4 of
Paragraphs 5.1, A and 5.2, A
Deleted Paragraph 5.1, A.6
Deleted “stripper” in 5.1, A.5 CAUTION
Added new text to second paragraph 5.1,A.5
Added text to Paragraph 5.1, A.6
Modified Paragraph 5.1, B, 5.2, B; and 5.2, C.1
and 2
Added inspection pointer to Paragraphs 5.1
and 5.2
Removed “smallest” from Step 6 of Paragraph
5.1, C
Added “with both hands” to Paragraph 5.1, C.5
Changed “fiber” to “buffer” in Paragraph 5.1,C
Removed previous Section 7
Added Cleaning Flow Matrix to page 8
Added reference to inspection kit and cleaning
and inspection guide
Moved end STOP artwork and available aids to
Paragraphs 5.1, C.10.d and 5.2, C.10.d
Moved Figures 2, 3, 4, and 5 to middle of
document
Rebranded to
CommScope
E
