CommScope DryLine ODPMT200 Series, User Manual

Page: 5 / 20

ODPMT200 Series DryLine® Dehydrator User Manual
5
Figure 2 - Changing Alarm Outputs:
1.5 Specifications
Output Pressure Constant 5.0 psig
Output capacity 12.0 SCFH (80Iiters/h)
(total, approx.) 0.2
SCFH (1.5 liters/m)
Output Dew Point, -49°F (-45°C) or better
Operating Temperature -30° to +130° F
Range (-34° to +54° C)
Low Pressure Alarm 1.0 lb/in2 (6.9 kPa)
Electrical Input 115 Vac, 50/60 Hz
Output Connector 3/8” polytube,
compression
Dimensions 18.5” W x 32.0” H x
10.0” D
Optional Alarms:
High Humidity Alarm
Set Point 7.5% RH, factory set
Excess Run Alarm
Set Point 10 minutes, factory set
Power Fail Alarm loss of input power
Alarm Factory setting Where To
Reset
Low Normally Alarm switch
Pressure Closed (N.C.) center term.
N.O., bottom
term N.C.
Mains Normally Power Fail
(Power) Open (N.O.) Jumper JP6 on
Alarm PCB
Excess Normally Jumper JP5 on
Run Open (N.O.) Run Alarm
PCB
High Normally Jumper JP4 on
Humidity Open (N.O.) Alarm PCB