7
4.3
Route the incoming pigtails of the splitter (marked with red flag)
to the base tray (area nr. 2). Remove the outer jacket from the mark over
a distance of 1.2m. Secure with foam and tie-wrap onto the base tray.
4.2
Install the splitter into the holder and route the pigtails via the
bend control.
OCM6 butt
Slide
Click
OCM6 in-line
4.4
In case of splitter modules with integrated adaptors for the
incoming signal.
Insert the connector of the pigtail in the adaptor of the
splitter and route the pigtail to the base tray. Remove the outer jacket
over a distance of 1.2 m and secure with foam and tie-wrap onto the
base tray.
