(Continued from page 7)
5. Install arm cover (Item 7) onto arm with welding (Item 6).
Fully tighten all M16 nuts (Item 5).
(continued on page 9)
BSAMNT-SBS-2-3 KIT
5
4
3
7
6
2
1
3
4
5
6
7
BOLT DIAMETER
TORQUE
M16
96 N.m (71 ft. lbs)
639848
Page 8 of 13
www.commscope.com
© 2019 CommScope, Inc. All rights reserved.
Visit our website at www.commscope.com or contact your local CommScope representative or BusinessPartner for more information.
All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc. 639848 E (08/19)
