Commodore CASSIOPEI, User Manual

Page: 73 / 76

The firmware uploading webpage will be shown, it has 2 buttons. A browse and an update button.
Press then “browse”-button, to select the firmware image file (you know, the one you've downloaded
earlier).
Press the “upload”-button. After pressing this button you must wait a few seconds as the request is being
processed. When the firmware has been transferred successfully and the file is correct it will
automatically reboots the Cassiopei. When the CASSIOPEI is back onto the network the webpage will
be refreshed and you will see the page hosted by the new firmware inside the Cassiopei. The Cassiopei
is now upgraded with new firmware and ready for use. To confirm if the firmware indeed has been
upgraded, reset the Cassiopei and watch the screen, the firmware version shown now must reflect the
version of the file you've selected during the upgrade procedure.
In some occasion the upgrading procedure will fail, this may have been caused by packet loss during the
file transfer. This may be the case if there is some heavy traffic on the wifi network and/or if the wifi
network is unexpectedly interrupted caused by a weak connection and/or interference. This is not a big
problem, simply reset the whole system and try again. If this problem persists, try the upgrade procedure
at a location closer to the wifi router to exclude bad wifi reception.
13.2 FW Update through SD-card
Download the new firmware from the Cassiopei website and store it on the SD-card, the file must have
the following filename in order to be recognized as a firmware file: CASSIOPEI_FW.BIN
Insert the SD-card into the Cassiopei, connect the Cassiopei into your CBM computer, power ON your
CBM computer and wait for a few seconds. Progress is shown on the display, the Cassiopei will remove
the file when finished and reset. Your Cassiopei is now upgraded.
2019-10-27 Page 73 of 76 CASSIOPEI v2.0