Commodore CASSIOPEI, User Manual

Page: 25 / 76

4.1 File manager
The easiest way to add files to the Cassiopei filesystem is by removing the card and inserting it into
your PC using an USB SD-card adapter. Another way would be by using the web interface.
When the menu is shown, click onto the “File manager” button and wait a few seconds for it to
load. The file manager works but is not really fast. Depending on the number of files added to the
filesystem, the file manager may respond even slower. But despite from being slow, it is very
practical as it allows you to quickly add a file without having to remove the SD-card from the
Cassiopei. It might also come in handy for those situations where the computer you have your
.PRG file does not have an SD-card slot or USB card reader.
Below you'll see the file
manager, when you click
onto the '+' of each
folder, it will unfold and
show the contents. Then
you may click onto a file
and “download” or
“delete” that file from
the card. As shown in the
image below.
If you want to add a file,
move your mouse over
to the desired location
and press the right
mouse button and choose
“upload”, now the
contents of the upload
field changes.
Then press the browse
button and select the file
from your PC. Again the
upload field changes.
When you press the
“upload” the file will be
send to the SD-card
inside the Cassiopei, after a few seconds the screen is refreshed and the file is shown and ready for
use.
Advanced user might also directly type the destination path for the uploaded file directly into the
upload field, however this is not recommended as typing errors are easily made resulting in all sorts
of problems.
2019-10-27 Page 25 of 76 CASSIOPEI v2.0