Single socket (wired) configuration
Congratulations, you are the brave one, not afraid of a soldering iron!
Install ARM2SID to the socket with the correct orientation. Connect the
provided cable with the connector to the ARM2SID and connect its wires to
the following points in you C64/C128:
A8
–
pin 15 of CPU
A5
–
pin 12 of CPU
R/W
–
pin 5 of expansion port connector
IO
–
connects to IO2 (pin 10 of expansion port connector) for Sound
Expander SFX $DFxx compatibility, IO1 (pin 7 of expansion port connector)
for $DE00 stereo SID play or both with diodes and resistor pullup.
GND
–
computer ground, not needed to connect
Audio R
–
right audio channel, usually connects to pin 7
of
A/V DIN jack. We
suggest to add 10µF/10V electrolytic capacitor between ARM2SID Audio R
output and pin 7 of A/V DIN jack to separate the DC component from the
ARM2SID audio output. Cap pin should go to the ARM2SID.
ARM2SID wires connection:
