6
Installation (continued)
2
Removing the mounting plate
NOTE:
The mounting plate (D) and mounting plate bolt (C)
come pre-assembled on the light fixture (A) for shipping.
□
Remove the mounting plate (D) from the back
of the fixture by loosening the mounting plate
bolt (C) using the Allen key (DD).
NOTE:
Only unscrew the bolt (C) far enough to remove the
mounting plate (D). Do not fully remove the bolt (C).
D
C
DD
3
Installing the mounting plate
□
Route the junction box wires through the large
center hole in the mounting plate (D).
□
Align the holes on the mounting plate (D)
with the holes on your junction box. Use two
#8 screws (AA), depending on the size of
the holes in your junction box, to attach the
mounting plate (D) to your junction box
□
Please make sure
the “TOP” is upwards.
AA
D
4
Hanging the fixture to the
mounting plate
□
Place the small sphere head of the hanger
wire (E) between the back of the small groove
located on the bottom of the center hole of the
mounting plate (D).
□
Ensure the photocell (B) is facing upwards
when the light fixture (A) is installed.
NOTE:
Ensure the light fixture (A) can safely hang onto the
mounting plate (D) to allow for use of two hands to make the
wiring connections.
D
E
A
A
B
D
E
B
