B
BB
CC
AA
6
CAUTION:
Avoid drilling near electrical wiring and water
pipes. The mounting system must be attached to a weight
bearing wall. Failure to observe all safety precautions can
result in serious physical injury and/or property damage.
Consult a professional installer or call customer service if
you have any questions.
CAUTION:
Do not drill in mortar between masonry blocks
or into loose concrete. Never drill into hollow masonry block.
□
Use the bracket (B) as a template to mark the installation holes. Use a level to ensure the bracket is level.
□
Use a 5/16 in. (8 mm) masonry drill bit to slowly drill 2.2 in. (55 mm) pilot holes.
□
Insert anchors (BB) into the holes. Ensure the anchors are completely flush to the concrete surface even
if covered by a layer of joint compound or other material.
□
Attach the bracket (B) to the wall using the lag bolts (AA) and washers (CC).
Installation (continued)
2
Installing the bracket (concrete/masonry walls)
