□
□
1
Installation
2
□
3
PREPARING THE WALL FOR INSTALLATION
CUT DRYWALL FOR TOP AND BOTTOM PLATES
Installation Guide
Flat Panel TV Cable Organizer Kit
Item #1001863164
Model #5623-WH
PACKAGE CONTENTS
A - Pre-Assembled Top Plate w/ 15 A/125 V Duplex Receptacle,
8 ft 14/2 With Ground Pre-Stripped Electrical Building Wire
and Attached Mounting Wings
B - Bottom Plate With Easy Push-in Connectors and Attached
Mounting Wings
C - 6 ft. Extension Cord w/ 360˚ Rotating Flat Head
TOOLS NEEDED
Drywall Saw
Tape Measure
Phillips Head Screwdriver
Pencil
Level
Stud Finder
D - Electrical Box
TEMPLATE
CAUTION
Intended for use on 15 amp branch circuits
Not intended for use in drywall with fire
walls
On outside exterior walls with insulation
push away insulation to allow proper
mounting
Determine the top and bottom plate location*.
Use the stud finder to center between the wall framing
studs.
□
Be sure to frame your plate both vertically and
horizontally.
□
For video information visit homedepot.com and search SKU 1001863164 or model number 5623-WH
Tape
*This kit is designed for standard 2x4 framed walls.
Both top and bottom plates are installed between the same two
studs.
Up to 7’
Up to 6’
Outlet
Height or
18”
TIP: Loop a piece of tape with the sticky side outward to form a circle and
apply it to the back of the template to secure it to the wall.
Using the template supplied, trace the opening for both the top and
bottom plate on the wall. Remember, the plates are designed to be
mounted centered between the studs.
With your template secured to the wall with the tape, using a
drywall saw
,
cut a hole in the drywall the size of each template
Scan Me
RoHS Compliant
This product is patent protected by
U.S. Patent number:
7390964B2, 7399920B2,
D553475S, D554475S and D568719S
ETL LISTED
CONFORMS TO
UL STD. 498
CERTIFIED TO
CAN/CSA STD. C22.2#42.1:200-1
3026001
Rev. 12/23/2019
PREPARING THE WALL FOR INSTALLATION
