14
Installation – Guy Wires
5
Insert the Guy Wire Band
□
Insert the guy wire band through the top eyelet of each of
the four (4) turnbuckles.
6
Pull the Cords through the Cable Lock
□
Pull one of the ends of the cord through one of the holes on
the cable lock and then pull the end into the groove to lock
it. Use pliers to properly secure the cord in the groove of
the cable lock.
7
Repeat Step 6
□
Repeat step 6 for the second end of the cord using the
opposite hole and groove on the cable lock. The safety
cable should be pulled tight.
NOTE: THE CORD IS CUT TO A PREDETERMINED
LENGTH FOR PROPER TENSION. DO NOT
EXCESSIVELY STRETCH THE CORD.
